PLANET MGSW-28240F - Manual (Page 151)

Command Guide of MGSW-28240F
Switch (config-if) # switchport vlan mac 00:55:44:33:22:11 vlan 5
4.2.56.129 switchport vlan mapping
Command:
switchport vlan mapping
switchport Switching mode characteristics
vlan VLAN commands
mapping Maps an interface to a VLAN translation group.
Group id
Default:
None
Usage Guide:
To configure Group mapping Table for specific interface
Example:
To configure Group mapping (Group 25) for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # switchport vlan mapping 25
4.2.56.130 switchport vlan protocol group
Command:
switchport vlan protocol group vlan
switchport Switching mode characteristics
vlan VLAN commands
protocol Protocol-based VLAN commands
group Protocol-based VLAN group commands
Group Name (Range: 1 - 16 characters)
vlan vlan keyword
VLAN ID required for the group to VLAN mapping (Range: 1-4095)
Default:
-151-