PLANET MGSW-28240F - Manual (Page 334)

Command Guide of MGSW-28240F
repeat Specify repeat count
1-60; Default is 5
size Specify datagram size
2-1452; Default is 56 (excluding MAC, IP and ICMP headers)
Default:
N/A
Usage Guide:
To run the IPv4 Ping function
Example:
To run the IPv4 Ping (192.168.0.78) function
Switch# ping ip 192.168.0.78
PING server 192.168.0.78, 56 bytes of data.
64 bytes from 192.168.0.78: icmp_seq=0, time=0ms
64 bytes from 192.168.0.78: icmp_seq=1, time=0ms
64 bytes from 192.168.0.78: icmp_seq=2, time=0ms
64 bytes from 192.168.0.78: icmp_seq=3, time=0ms
64 bytes from 192.168.0.78: icmp_seq=4, time=0ms
Sent 5 packets, received 5 OK, 0 bad
4.18.2 ping ipv6
Command:
ping ipv6 [ repeat ] [ size ] [ interval ]
[ interface vlan ]
ping Send ICMP echo messages
ipv6 IPv6 (ICMPv6) echo
interface Select an interface to configure
vlan VLAN Interface
VLAN identifier(s): VID
interval Specify repeat interval
0-30; Default is 0
repeat Specify repeat count
1-60; Default is 5
size Specify datagram size
2-1452; Default is 56 (excluding MAC, IP and ICMP headers)
-334-