PLANET MGSW-28240F - Manual (Page 259)

Command Guide of MGSW-28240F
nominate Nominate a clk input to become a selectable clock source.
clk-in Nominate the station clock input as a source. The PCB104 SyncE module supports 10 MHz station clock input
interface Nominate an ethernet interface as a source
Default:
None
Usage Guide:
To configure Nominated mode of network-clock
Example:
To configure Nominated mode of network-clock for interface GigabitEthernet 1/2
Switch# configure terminal
Switch (config)# network-clock clk-source 1 nominate interface GigabitEthernet 1/2
4.2.158 network-clock clk-source priority
Command:
network-clock clk-source priority <0-1>
network-clock network-clock
clk-source clk-source - commands related to a specific clock source.
Clock source number
priority Priority of nominated clock sources
<0-1> Priority number
Default:
0
Usage Guide:
To configure priority of network-clock
Example:
To configure priority (1) of network-clock (source 1)
Switch# configure terminal
Switch (config)# network-clock clk-source 1 priority 1
-259-