PLANET MGSW-28240F - Manual (Page 265)

Command Guide of MGSW-28240F
Switch# configure terminal
Switch (config)# ntp
4.2.167 ntp server
Command:
ntp server <1-5> ip-address { | | }
ntp Configure NTP
server Configure NTP server
<1-5> index number
domain name
ipv4 address
ipv6 address
Default:
None
Usage Guide:
To configure the IP addresses of NTP Server
Example:
To configure the IP address (9.9.9.9) of NTP Server for index 1
Switch# configure terminal
Switch (config)# ntp server 1 ip-address 9.9.9.9
4.2.167.1 do
Command:
do < exec commands >
do To run exec commands
Default:
N/A
-265-