PLANET MGSW-28240F - Manual (Page 258)

Command Guide of MGSW-28240F
Example:
To configure preferred negotiation (slave) of network-clock (source 1)
Switch# configure terminal
Switch (config)# network-clock clk-source 1 aneg-mode slave
4.2.156 network-clock clk-source hold-timeout
Command:
network-clock clk-source hold-timeout <3-18>
network-clock network-clock
clk-source clk-source - commands related to a specific clock source.
Clock source number
hold-timeout The hold off timer value in 100 ms.Valid values are range 3-18.
<3-18> Value in 100ms. E.g 9 gives a hold timeput of 900 ms
Default:
None
Usage Guide:
To configure hold off timer of network-clock
Example:
To configure hold off timer (800 ms) of network-clock (source 1)
Switch# configure terminal
Switch (config)# network-clock clk-source 1 hold-timeout 8
4.2.157 network-clock clk-source nominate
Command:
network-clock clk-source nominate { clk-in | { interface
} }
network-clock network-clock
clk-source clk-source - commands related to a specific clock source.
Clock source number
-258-