PLANET MGSW-28240F - Manual (Page 237)

Command Guide of MGSW-28240F
Command:
mep [ mip ] down domain { port | evc | vlan } [ vid ] flow
level interface
mep Maintenance Entity Point
mip This MEP instance is a half-MIP
The MEP instance number.
down This MEP is a Down-MEP
domain The domain of the MEP
evc This MEP is a EVC domain MEP.
port This MEP is a Port domain MEP.
vlan This MEP is a VLAN domain MEP.
flow The flow instance that the MEP is related to.
The flow instance number when not in the port domain.
vid In case the MEP is a port Up-MEP or a EVC customer MIP the VID must be given.
The port Domain MEP VID. This is required for a Port Up-MEP.
Default:
None
Usage Guide:
To configure Down-MEP of MEP.
Example:
To configure Down-MEP of MEP 1 as below table
Switch# configure terminal
Switch (config)# mep 1 down domain port flow 1 level 0 interface GigabitEthernet 1/1
4.2.125 mep lb
Command:
mep lb [ dei ] [ multi | { uni { { mep-id } | { mac
} } } ] count size interval
mep Maintenance Entity Point
The MEP instance number.
-237-