PLANET MGSW-28240F - Manual (Page 57)

Command Guide of MGSW-28240F
are limited.
next Insert the current ACE before the next ACE ID
policy Policy
rate-limiter Rate limiter
redirect Redirect frame to specific port
shutdown Shutdown incoming port. The shutdown feature only works
when the packet length is less than 1518 (without VLAN
tags).
tag-priority Tag priority
vid VID field
Default:
N/A
Usage Guide:
To create and set up a profile for the access list.
Example:
To set a Profile 1 up (action: permit, dmac-type: unicast, frametype: ipv4-icmp, ingress: any, logging: disable, policy:
1, rate-limiter: 1, tag-priority: 1. vid: 1).
Switch# configure terminal
Switch (config)# access-list ace 1 action permit dmac-type unicast frametype
ipv4-icmp ingress any logging disable policy 1 rate-limiter 1 tag-priority 1 vid 1
4.2.15 access-list ace update
Command:
access-list ace update action {deny, permit} | dmac-type {any,
broadcast, multicast, unicast} | frametype {any, arp, etype, ipv4, ipv4-icmp, ipv4-tcp,
ipv4-udp, ipv6, ipv6-icmp, ipv6-tcp, ipv6-udp} | ingress {any, interface
10GigabitEthernet | GigabitEthernet } | logging {disable, next, policy,
rate-limiter, shutdown, tag-priority, vid} | next {, last}| policy
| rate-limiter {, disable} | redirect {disable,
interface 10GigabitEthernet | GigabitEthernet } | tag-priority {0-1, 0-3, 2-3,
4-5, 4-7, 6-7, , any} | vid {, any}
ACE ID
action Access list action
dmac-type The type of destination MAC address
frametype Frame type
-57-