Avago Technologies MegaRAID SCSI 320-0 (520-0 CH) - Manual (Page 93)

Installing Clusters under Windows 2000 4-35
Copyright © 2003-2008 by LSI Corporation. All rights reserved.
4.7.17 Verifying Installation
There are several ways to verify that Cluster Service was successfully
installed. Here is a simple one:
Step 1. Select Start—> Programs—> Administrative Tools—> Cluster
Administrator.
The Cluster Administrator Screen displays, as shown in
Figure 4.16 . The presence of two nodes shows that a cluster
exists and is in operation.
Figure 4.16 Cluster Administrator Screen
Step 2. Right-click the group Disk Group 1 and select the option Move.
This option moves the group and all its resources to another
node. Disks F: and G: are brought online on the second node.
Watch the screen to see this change.