Avago Technologies MegaRAID SCSI 320-0 (520-0 CH) - Manual (Page 35)

SCSI Device Cables 2-11
Copyright © 2003-2008 by LSI Corporation. All rights reserved.
Figure 2.8 SCSI Cable – 68-Pin HD to 68-Pin HD
2.4.3 Connecting Internal SCSI Devices
This subsection provides step-by-step instructions for connecting internal
SCSI devices. The figures show the MegaRAID 320-2 Storage Adapter,
which has two internal connectors and two external connectors. Refer to
Section 2.4.1, “Internal SCSI Cables,” for examples of internal cables.
Perform the following steps to connect devices.
Step 1. Plug the 68-pin connector on the end of the SCSI ribbon cable
into the internal connector on the host adapter.
Figure 2.9
shows how to do this.
Figure 2.9 Connecting an Internal SCSI Cable to Host Adapter