Avago Technologies MegaRAID SCSI 320-0 (520-0 CH) - Manual (Page 29)

Detailed Installation 2-5
Copyright © 2003-2008 by LSI Corporation. All rights reserved.
Figure 2.2 Inserting the MegaRAID 320-2E Card in a PCI-Express
Slot
Step 5. Set the Target IDs
Set target identifiers (TIDs) on the SCSI devices. Each device
in a channel must have a unique TID. Provide unique TIDs for
non-disk devices (CD-ROM or tapes), regardless of the channel
where they are connected. The MegaRAID 320 Storage
Adapter automatically occupies TID 7, which is the highest
priority. The arbitration priority for a SCSI device depends on its
TID.
Edge of
Motherboard
Bracket Screw
PCI-Express Slot
Press Here
Press Here