Target ids – Avago Technologies MegaRAID SCSI 320-0 (520-0 CH) User Manual
Page 30
2-6
Hardware Installation
Copyright © 2003-2008 by LSI Corporation. All rights reserved.
Step 6.
Connect SCSI Devices to the Storage Adapter
Use SCSI cables to connect SCSI devices to the Storage
Adapter. Refer to
Section 2.4.1, “Internal SCSI Cables”
Section 2.4.2, “External SCSI Cables”
for SCSI cable
information. Refer to
Section 2.4.3, “Connecting Internal SCSI
and
Section 2.4.4, “Connecting External SCSI
for details on connecting the controller to internal and
external devices.
To connect the SCSI devices
a.
Disable termination on any SCSI device that does not sit at
the end of the SCSI bus.
b.
Configure all SCSI devices to supply TERMPWR.
c.
Connect cables to the SCSI devices. Refer to the following
table for maximum cable lengths.
You can connect up to 15 Ultra SCSI devices to each
SCSI channel.
Table 2.1
Target IDs
Priority
Highest
Lowest
TID
7
6
5
. . .
2
1
0
15
14
. . .
9
8
Device
Cable Length
in Meters
Fast SCSI (10 Mbytes/s)
3
SE SCSI
3
Ultra SCSI
1.5
LVD
12