Avago Technologies MegaRAID SCSI 320-0 (520-0 CH) - Manual (Page 84)

4-26 Installing and Configuring Clusters
Copyright © 2003-2008 by LSI Corporation. All rights reserved.
Figure 4.8 User Account and Password Validation
Step 12. Enter a name for the cluster (up to 15 characters) and click on
Next. (In our example, the cluster is named ClusterOne.)
Step 13. Type the user name of the Cluster Service account that you
created during the pre-installation. (In our example, the user
name is cluster.)
Step 14. Enter a password for the service account.
Step 15. Type the domain name, then click on Next.
At this point the Cluster Service Configuration Wizard validates
the user account and password.
Step 16. Click on Next.
The Add or Remove Managed Disks screen displays, as shown
in
Figure 4.9 .