Avago Technologies MegaRAID SCSI 320-0 (520-0 CH) - Manual (Page 108)

4-50 Installing and Configuring Clusters
Copyright © 2003-2008 by LSI Corporation. All rights reserved.
Figure 4.27 Configuration Analysis Screen
Note: The Windows 2003 Cluster Service installation wizard
differs from the Windows 2000 Cluster Service installation
wizard in that it automatically detects the disk and network
settings to use to configure the cluster.
Step 9. The Setup process then analyzes the node for possible
hardware or software problems that can cause problems with
the installation.
Step 10. Review any warnings or error messages.
You can click View Log or Details to get detailed information on
each warning or error message.
Step 11. Press or click Next after the configuration is analyzed.
The IP Address screen displays, as shown in Figure 4.28 .