Avago Technologies MegaRAID SCSI 320-0 (520-0 CH) - Manual (Page 90)

4-32 Installing and Configuring Clusters
Copyright © 2003-2008 by LSI Corporation. All rights reserved.
Figure 4.14 Cluster IP Address Dialog Box
Step 9. Enter the unique cluster IP address and Subnet mask for your
network, then click Next.
The Cluster Service Configuration Wizard automatically
associates the cluster IP address with one of the public or mixed
networks. It uses the subnet mask to select the correct network.
The final wizard dialog box displays.
Step 10. Click Finish to complete the cluster configuration on the first node.
The Cluster Service Setup Wizard completes the setup process
for the first node by copying the files needed to complete the
installation of Cluster Service.
After the files are copied, the Cluster Service registry entries
are created, the log files on the quorum resource are created,
and the Cluster Service is started on the first node.
The dialog box displays, as shown in Figure 4.15 .