Avago Technologies MegaRAID SCSI 320-0 (520-0 CH) - Manual (Page 91)

Installing Clusters under Windows 2000 4-33
Copyright © 2003-2008 by LSI Corporation. All rights reserved.
Figure 4.15 Cluster Service Confirmation
Step 11. Click OK.
Step 12. Close the Add/Remove Programs window.
4.7.15 Validating the Cluster Installation
Use the Cluster Administrator snap-in to validate the Cluster Service
installation on the first node.
To validate the cluster installation:
Step 1. Click Start.
Step 2. Click Programs.
Step 3. Click Administrative Tools.
Step 4. Click Cluster Administrator.
The Cluster Administrator screen displays. If your snap-in
window is similar to the one shown in the screen, your
Cluster Service was successfully installed on the first node. You
are now ready to install Cluster Service on the second node.