Avago Technologies MegaRAID SCSI 320-0 (520-0 CH) - Manual (Page 77)

Installing Clusters under Windows 2000 4-19
Copyright © 2003-2008 by LSI Corporation. All rights reserved.
Table 4.2 Example IP Addresses
In this example, you would type:
Ping 192.168.0.172
and
Ping 10.1.1.1
from Node 1.
Then you would type:
Ping 192.168.0.172
and
10.1.1.1
from Node 2.
To confirm name resolution, ping each node from a client using
the node’s machine name instead of its IP number.
4.7.7 Verifying Domain Membership
All nodes in the cluster must be members of the same domain and must
be capable of accessing a domain controller and a DNS Server. You can
configure them as either member servers or domain controllers. If you
configure one node as a domain controller, configure all other nodes as
domain controllers in the same domain.
Node Network Name Network Adapter IP Address
1 Public Cluster Connection 192.168.0.171
1 Private Cluster Connection 10.1.1.1
2 Public Cluster Connection 192.168.0.172
2 Private Cluster Connection 10.1.1.2