Avago Technologies MegaRAID SCSI 320-0 (520-0 CH) - Manual (Page 85)

Installing Clusters under Windows 2000 4-27
Copyright © 2003-2008 by LSI Corporation. All rights reserved.
Figure 4.9 Add or Removed Managed Disks Screen
4.7.14 Configuring Cluster Disks
The Windows 2000 Managed Disks displays all SCSI disks, as shown on
Figure 4.9 . It might display SCSI disks that do not reside on the same
bus as the system disk. Because of this, a node that has multiple SCSI
buses lists SCSI disks that are not to be used as shared storage. You
must remove any SCSI disks that are internal to the node and not to be
shared storage.
The Add or Remove Managed Disks dialog box ( Figure 4.9 ) specifies
disks on the shared SCSI bus that are used by Cluster Service.
Perform the following steps to configure the clustered disks:
Step 1. Add or remove disks as necessary, then click Next.
The Configure Cluster Networks dialog box displays, as shown
in
Figure 4.10 .