Avago Technologies MegaRAID SCSI 320-0 (520-0 CH) - Manual (Page 113)

Installing Clusters under Windows Server 2003 4-55
Copyright © 2003-2008 by LSI Corporation. All rights reserved.
4.8.6 Validating the Cluster Installation
Use the Cluster Administrator snap-in to validate the Cluster Service
installation on the first node. Follow the procedure in this subsection to
validate the cluster installation.
Procedure for Installing the Second Node – Perform the following
steps to validate the cluster installation.
Step 1. Click Start.
Step 2. Click Programs.
Step 3. Click Cluster Administrator.
The first node displays. After installation it is necessary to set
the network priority and roles.
Step 4. Right click on the cluster name and select Properties, as shown
in
Figure 4.32 .
Figure 4.32 Selecting Properties in Cluster Administrator