Solare Datensysteme Solar-Log - Manual (Page 64)

64
Operating via a web browser within your own network
Table View Section
The configured control logics are listed in this section. The profile position is displayed in the "Control
logic" column. The configured logic type corresponding to the profile position is displayed in the "Type"
column. The "Switch" column indicates which switch is linked to this profile. Move the mouse cursor over
the symbols to display additional information or view detected errors.
Matrix View
The individual switches of the control logic are listed in this section. In addition, the configuration can be
checked if is correct based on the green check.
Definition of the Symbols*
The check indicates which profile is linked to which switch.
A profile has not been assigned to the switch. The assignments can be defined from the Con-
figuration | Special Functions | Smart Home | Control Logic menu.
Error in the configuration Information for the respective errors is in the mouseover text. De-
pending on the error, the profile and/or switch configuration has to be checked and corrected.
Provides additional information such as the defined type.
* Information is displayed via the mouseover text.
Status (current)
All of the data based on the profiles and appliances configured in the Configuration | Devices | Definition |
Smart Home is displayed in the Status (current) menu.
There are several sections with different values. The sections and values depend on which devices have
been connected and which profiles have been configured.
Explanation of the sections based on the example plant with the following combinations:
•
2 inverters
•
1 consumption meter
•
1 EGO Smart Heater
•
2 active Smart Home profiles (Surplus + Heatrod 3-stage digital)
Additional plants and configurations can be derived and explained based on this example combination.