Solare Datensysteme Solar-Log - Manual (Page 48)

48
Operating via a web browser within your own network
•
Days:
Under days (default "All days"), you can select individual days or leave the default selection as is.
•
Status codes:
Under status codes (default "All status codes"), you can select individual status codes or leave the default
selection as is.
•
Fault codes:
Under fault codes (default "All fault codes"), you can select individual fault codes or leave the default se-
lection as is.
By default, the current day is displayed in the table with all devices, fault codes and status codes.
2�12�2 Accessing Notifications
To access the Notifications menu, go to Diagnostic | Notifications.
Fig.: Notification overview
The notification overview is displayed as a table.
A maximum of 50 messages are displayed in this table. The following columns are displayed:
•
Message date:
Displays when a fault is detected and reported.
•
Send date:
A date is displayed in this column if the message has been successfully sent. Pending is displayed in this
column if there are more send attempts remaining, or aborted after 5 unsuccessful attempts to send the
message.
•
Send Tries:
The number attempts needed to successfully send the message or the number of unsuccessful attempts is
displayed in this column. Aborted occurs after 5 unsuccessful attempts to sent the message. The number 1
to 5 can be displayed in this column if there are still more send tries remaining.
•
Message type:
This column displays the type message (for example, Offline . If an inverter is offline).
•
Recipient:
The method with which the message is sent is displayed here.
•
Text:
There is the option to display the messages sent by the Solar-Log™ under Text.