Solare Datensysteme Solar-Log User Manual

Page 10

Operating via a web browser within your own network

Configuration Page

Here you can make necessary configurations for the optimal monitoring and evaluation of your plant. You
can also view information on the power output, yields and the device.

You can entered a password protected section by clicking on the log in button (at the bottom right corner

of the screen) and entering your user and password. On the right side on the bottom, there is a blue line

next to the log in button which indicates if you are logged in and with which user level. (Refer to the

Ac-

cess Control

section for more information)

Fig.: Log in button with selection box

Hide arrow

The "Hide Arrow" (on the right of the header bar) allows you to increase the amount of the page displayed

in the browser by hiding the Welcome header.

Fig.: Header bar with the "Hide Arrow"

New Firmware

A notification is sent via the Web browser when a new firmware is version available; a green triangle with

an exclamation mark is displayed at the top in the status line. (See illustration: Signal for new firmware)

Fig.: Signal for new firmware

Note

The

Automatic Firmware Update Check

has to be activated in the

Configuration |

System | Firmware

menu to use this function. (See illustration: Automatic Firmware

Update Check with notification text displayed)