Solare Datensysteme Solar-Log - Manual (Page 28)

28
Operating via a web browser within your own network
2�7 Balances
You can see the relationship between your plant's production and consumption from the Balances menu.
The following points are displayed in all of the views (day, month, year and total):
•
Production
•
Consumption
•
Self-consumption
The following points are additional displayed when a battery system is connected (see Fig.: Day Balance
graph with battery system):
•
Self-consumption Battery (kWh)
•
Charge (kWh)
•
Discharge (kWh)
Note !
The consumption as well as the values from the battery are only displayed once
the systems are connected (consumption meter + battery system).
Note !
The auto scaling option always scales the graphics up as much as possible in the
yield data section. The auto scaling can be manually disabled for the respective
graphics. Then the scaling is done based on the value defined in the device config-
uration. Please refer to the the chapter on configuring inverters in the Installation
Manual.