Solare Datensysteme Solar-Log - Manual (Page 105)

105
Operating the Solar-Log 500 and 1000 via the Display
Updating the firmware
The Solar-Log™ firmware can be updated via the USB connection.
Go to our website to download the current firmware version:
http://www.solar-log.com/de/service-support/firmware.html.
1. Select the Solar-Log 1000 and copy the firmware to the USB stick.
2. Plug the USB stick into the Solar-Log 1000.
3. Tap on USB in the main menu.
4. Tap on Update Firmware.
Fig.: USB Firmware Update
5. Tap on Search Firmware .
6. The current firmware is located on the USB stick and imported.
Note !
Clear your Internet browser's cache after the update.
7. Tap on Cancel if you do not want to update.
•
The main navigation screen is displayed.
5�7 Changing settings in the configuration menu
The configuration menu allows you to change settings and to make adjustments to the device's software.
Although the device should be pre-configured by your installer, it may happen that you would like to like
to make adjustments such as changing your password and changing the network settings when, for exam-
ple, you get a new router.
•
Contact your installer for changes to your configuration.
•
If you would like to make the changes yourself, you can download the Installation Manual from our
website.