Rugged Cams Premier DVR - Manual (Page 97)

96
When the selection box is displayed, select On or Off using the direction (ST) buttons and press
the [SELECT] button.
D) RELAY
This function, when an alarm or event occurs, is used to activate the alarm device connected to the DIO
board of the equipment.
„ Relay setup
Using the direction (STWX) buttons, move focus to the channel you want to set in the {Data
setup} Æ {Data1~4} Æ {Alarming}Æ{Relay} menu and press the [SELECT] button.
To set all channels with the same value at once, move the focus to the {Relay} and press the
[SELECT] button.
When the selection box is displayed, select On or Off using the direction (ST) buttons and press
the [SELECT] button.
„ Selecting a relay type