Rugged Cams Premier DVR - Manual (Page 24)

23
Chapter System operation
- Starting/stopping the system
- - Starting the system
The default password of the local administrator is “00000”.
- Go to {Main setup} Æ {System} Æ {Local admin password} to change the password.
With the power being switched on, press the button on the remote control.
Then, lights are turned on at LOG, RECORD, SEARCH, STATUS, ESC and SELECT on the
front touch pad.
Using number buttons, enter the password for the local administrator.
When the password is matched, the welcome screen appears while the system is initialized.
Once the system is initialized and the system is started, images of the connected channels are
displayed on the screen.
Follow these rules to enter numbers using the front-side touch pad;
- Odd numbers: touch them shortly, Even numbers: touch them long
- Input initialization: [POWER] touch
- - Stopping the system
The default password of the local administrator is “00000”.
Go to {Main setup} Æ {System} Æ {Local admin password} to change the password.
Press the button on the remote control.
Using number buttons, enter the password for the system administrator and press the button.
When thepassword is matched, all lights of the front touch pad blink, an alarm sounds for around 20