Rugged Cams H.8 / H.16 DVR's - Manual

Quick
Reference
Guide
RUGGED CCTV
Default Settings for the H.8/H.16 DVR
• All Cameras are enabled and recording continuously 24/7
• Motion Detection if enabled is set to look at the entire screen and the sensitivity is
set to Medium.
• Date and Time info (can be changed one at a time from Menu/Setup/Time/Date &
Time)
o Date – internal time clock will bring up the correct date when system is
powered
o Time – set to (GMT – 06:00) Central Time on time zone screen
o NTP Time Sync is Off
• Network Settings (Statically assigned through the Rugged CCTV test network)
o IP Address – 192.168.1.12
o Subnet Mask – 255.255.255.0
o Default Gateway – 192.168.1.1
o Both DNS #’s completely left as 0’s
o These will more than likely need to be changed to be able to communicate
with the customers network
• User names and Passwords (these can be Modifi ed/Added/Deleted from Menu/
Setup/System/Users)
• At the DVR
o Admin and 00000
o User1 and 1111
o User2 and 2222
o User3 and 3333
o User4 and 4444
• On the CMS remote software – the initial Administrator password is
1111111, and when you are adding your DVR into the address book the
user name is user1 and 1111111 for the password.
RUGGED CCTV
201 North Elm Street, Kemp, Texas 75143
1-866-301-CCTV
Phone: 903-498-3240 • Fax: 903-498-8989
www.rugged-cctv.com
[email protected]