Rugged Cams Premier DVR - Manual (Page 113)

112
(11) Alarming Duration
This function is used to set the alarm-out time.
Move the focus to the {9. Alarm Duration} selection box using the direction (ST) buttons in the
{System} menu, and press the [SELECT] button.
When the selection box is displayed, set the alarm-out time using the direction (ST) buttons and
press the [SELECT] button.
(12) Firmware Upgrade
Premier 480/240 allows you to upgrade data conveniently using an external storage device or portable
storage device that supports USB2.0.
Prepare upgrade files that are compatible with the product characteristics, and copy them to the
highest folder of the device you want to use, such as external storage device and portable storage
device that support USB2.0.
1)
2)
3) When you copy upgrade files from PC, remove the USB device from PC properly
and detach it from the USB port.
If you detach the USB device from the USB port while upgrade files are not
completely copied, DVR system may not identify them automatically.
While a HDD is not mounted, you can not perform upgrade task.
Connect the storage device where upgrade files are stored to the USB2.0 connection terminal in the
rear of the DVR.
Move the focus to the {10. Firmware Upgrade} selection box using the direction (ST) buttons in
the {System} menu.
At the focus, press the [SELECT] button.
A few (~15) seconds later, the following information window related to the upgrade is activated.