Rugged Cams Premier DVR - Manual (Page 45)

44
Recording status depending on the color
Green Continuous recording
Red Motion recording
Blue Sensor recording
Yellow Sound recording
No color No recording
HDD status
Check the right side of the STATUS OSD to see the status of HDD that recorded images are stored in, as in
the following figure.
- HDD overwriting On/Off setup is done with the {Main setup} → {Storage device} menu.
ƒWhen the HDD overwriting function is
enabled.
ƒWhen the HDD overwriting function is
disabled.
Network access status
Check the right side of the STATUS OSD to see the status of the network connection, as in the following
figure.
ƒNetwork is connected ƒNetwork is not connected
- - Starting/stopping all recordings
To start or stop all channel recordings, either touch the [RECORD] button on the front touch pad or press
the [RECORD] button on the remote control/mouse menu.