Rugged Cams Premier DVR - Manual (Page 92)

91
C) SOUND
Sets the detection for input from the external audio linked to the system.
It is allowed to set inputs from up to 16 external audio lines linked to the system. If there is an input
signal from an external audio signal, images of the corresponding channel are recorded. Each channel
can detect 1 to 16 external audio signals.
Using the direction (STWX) buttons, move focus to the channel you want to set in the {Data
setup} Æ {Data1~4} Æ {Event}Æ{Sound} menu and press the [SELECT] button.
To set all channels with the same value at once, move the focus to the {Sound} and press the [SELECT]
button.
When the selection box is displayed, select the audio channel using the direction (ST) buttons and
press the [SELECT] button.
The setup for the detection for more than one external audio input is as follows.