Rugged Cams Premier DVR - Manual (Page 2)

1
FCC Compliance Statement
Model Name: Premier 480/ Premier 240
This device complies with Part 15 of the FCC Rules. Operation is Subject to the following two
conductions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operations.
WARNING
- The partial or whole reproduction of this document is prohibited by law.
- Figures for examples in this document may be different from real objects.
- The specification and shape of this product may be subject to change due to the enhancement of the
quality without prior notice.
CAUTIONS
In order to use the product properly, please read carefully all cautions before using the product.
Follow the cautions carefully to ensure the safety.
z Prerequisites
1.
When installing or moving the DVR or peripheral devices or opening their covers,
connect/disconnect cables to/from them properly to avoid electric shock. Connect the
power cable to a grounded electrical outlet.
2. When installing the DVR into a power outlet, maintain it can be removed easily.
3. Do not use the DVR around water or in wet places.
4. Because there is a danger of suffocation with the vinyl packaging for the DVR and
peripheral devices, keep them in a location a child can not reach .
z Installation environment for the DVR
1.
Maintain a proper temperature (0˚C ~ 40˚C)/humidity(10% ~ 80%).
2. Install it in a safe place free from external vibration.
3. Install it in a well-ventilated clean place.
4. Install it in a place away from magnetic material to avoid data loss or failure of the hard
drive(s).
5. When the standard rack is not used, it is necessary to secure a space more than 60 cm from
the floor, 50 cm from the ceiling and 20 cm from the side and rear walls using an
additional table or structure.
z Safe rules for DVR
1.
Before installing an additional board or HDD, ensure that the power cable is disconnected
from the DVR.
2. Keep the product away from high-temperature objects such as heaters.
3. Do not use a damaged power cord.
4. Use cables and electrical outlets connected to a ground in order to prevent or minimize
problems due to electromagnetic waves and power surges.
5. Do not touch the power supply device while the power cord is connected. When thepower
cord is connected even though the power is switched off, the electrical current is still
flowing internally.