Rugged Cams Rugged Vision DVR - Manual (Page 84)

System Settings
1. DVR Name – This is the name to be used by the DVR server.
2. Location – The location of where the DVR server is.
3. Description – The description of the specific DVR server.
4. Initial
Overlay Screen – Displays the default screen layout when the DVR server starts.
5. Video Signal – Displays the current video signal.
6. SMTP Server – Displays the SMTP server address.
7. Username – Displays the username to be used when validating for the SMTP server.
8. Password
– Displays the password to be used when validating for the SMTP server.
9. Date/Time and Time Zone Option – Option to enable the setup of either the date/time or the
time zone.
10. Date/Time Setup – Enables the setup of the date and time for the DVR.
11.
T
ime Zone Setup – Enables the setup of the time zone for the DVR.
12. Set Date and Time Option – When this is selected, it will reset the DVR settings for the
date/time or the time zone depending on what option was selected.
13. Restore Defaults – Restores the default settings.
14. Apply – Saves the settings.
84