Rugged Cams Rugged Vision DVR - Manual (Page 59)

cont... Video Backup
NOTES:
1. Ensure that your backup device is attached (and turned on, if necessary).
2. The supported file system formats of the attached backup device are as follows:
• VFAT – This is a Windows-supported file system.
• EXT 2 & EXT 3 – These are Linux-supported file systems.
3. You may not be able to change the Storage Medium on certain models.
Image Backup
The DVR also saves still pictures from Live Display when you press [FREEZE] on the remote controller,
or when a picture is needed as an attachment for email notifications. You may get a copy of those still
pictures using this function.
Procedure Using the Remote Controller or Control Panel:
1. In Video Backup, use [LEFT] or [RIGHT] to navigate through the menu.
2. Press [UP], [DOWN], [+] or [-] to change the values.
3. When you are down changing values within the field, press [ENTER] or [SELECT].
4. After pressing [ENTER] or [SELECT], the available size and required size will be displayed.
5. Press [ENTER] or [SELECT] again to start back up. A dialog box will pop up, confirming your
request.
6. Select [YES] to continue. Otherwise, select [NO].
7. After selecting [YES], you will be brought back to Live View and the backup process will run in
the background. An icon at the top right will indicate that backup is on-going. During this time, DO NOT
unplug the USB device.
8. Once the icon disappears, backup is done and you may unplug the USB device.
NOTES:
1. Ensure that your backup device is attached (and turned on, if necessary).
2. The supported file system formats of the attached backup device are as follows:
• VFAT – This is a Windows-supported file system.
• EXT 2 & EXT 3 – These are Linux-supported file systems.
59