Rugged Cams Rugged Vision DVR - Manual (Page 47)

Watermark
This DVR can add watermark to key frames
in the recorded video. Watermarking pro-
tects the video from tampering.
To enable/disable watermark:
1. Go to Setup->Recording and select
Watermark.
2. Press either [ENTER], [SELECT], [+] or [-] to enable or disable watermark. A checkbox means it’s
enabled, while a cross will mean otherwise.
Event
Event setup allows user to configure
notifications and settings for event(s) to
be triggered.
Procedure Using the Remote Controller or Control Panel:
1. In SETUP, use [UP] or [DOWN] to select Event.
2. Press [ENTER], [SELECT] or [RIGHT] to expand the sub-menus.
3. To view/modify settings under the sub-menus, use [UP] or [DOWN] to select the sub-menu
and press [ENTER] or [SELECT].
4. In the sub-menu, navigate by pressing [UP] or [DOWN], [LEFT] or [RIGHT] to choose which
option to modify.
5. Press [ENTER] or [SELECT] to select a sub-menu.
47