Rugged Cams Rugged Vision DVR - Manual (Page 40)

Tools
This provides tools for formatting hard drives
changing the video signal type and updating
the DVR Server firmware.
1. To format new hard disk, select Format New
Hard Disk. You will be asked to confirm your request,
select YES to confirm or NO to cancel.
2. To format USB hard disk, select Format USB
Hard Disk. You will be asked to confirm your request,
select YES to confirm or NO to cancel.
3. To revert the DVR to manufacturing default
configuration, select Restore System Defaults. You will
be asked to confirm your request, select YES to confirm
or NO to cancel.
To change the Video Signal type, please follow the steps below:
1. Under System settings, select Tools->Video
Signal using [UP], [DOWN] and [ENTER/SELECT].
2. Change to your intended video signal by
selecting the option and press [ENTER/SELECT] to
save your settings. Press [SETUP], [LEFT] or [BACK] to
exit without saving.
3. You will need to restart your DVR before the
change will take effect. Push the reset button of the
DVR to reboot.
40