Ptz settings – Rugged Cams Rugged Vision DVR User Manual

Page 82

Text mode
Original mode

PTZ Settings

1. Baud

Rate – Displays a drop down list menu for baud rate settings.

2. Parity

– Displays a drop down list menu for parity settings.

3. Data

Bit – Displays a drop down list menu for data bit settings.

4. Stop

Bit – Displays a drop down list menu for stop bit settings.

5. With

PTZ – Indicates the PTZ status of the camera. If checked, it means that the camera is

equipped with PTZ capabilities.

6. Protocol – Displays a drop down list menu for supported PTZ protocols. Currently supported
PTZ protocols include Pelco D, Pelco P, Merit Li-Lin, DynaColor (DSCP), and VISCA SNC-R225.
NOTE: VISCA SNC-R225 protocol does not have autopan or iris functionality. It also only supports 6
preset positions.

7. Restore

Defaults – Restores the default settings.

8. Apply – Saves the settings.