Rugged Cams Rugged Vision DVR - Manual (Page 12)

Main Board (Top View)
DVR Internal Unit Ref. Des. Description
DVR – Internal Unit Ref. Des. Description
1. 4-Pin ATX Power Connector J17 Connection to power supply
12V-5V-GND
2 40-Pin IDE Connector J10 Connection to hard disk
(HDD1)
3. Tact Switch “RESET” SW1 For resetting/rebooting system
4. Terminal Block “Sensor
Input & Relay Output” J1 Connecting Sensor devices
and Relay Output devices to
control sensors and trigger
alarms
5. Ethernet Connector J3 Where you can connect the
RJ45 cable
6. 2 pc. USB Connector J16 Connection to USB device
7. Debug1 or uart Connector B1 RS232 port for GSM
connection
8. IR connector J6 Connection to IR sensor
9. Battery and Battery holder J7 Battery for Real Time Clock
10. DB25 Video and Audio
Input Connector J3 Connection with CCTV
Camera and Audio
11. Audio Output RCA Jack P3 Audio Output terminal
12. TV Out RCA Jack P2 1 TV Out RCA connection
13. Audio Input J5 Audio Input Terminal
14. 8 sensor, 4 relay J6 Input and output
15. 8 sensor, 4 relay J7 Input and output
12