Rugged Cams Rugged Vision DVR - Manual (Page 37)

DDNS
Enter the relevant information to connect to
the DDNS server. The DVR ID field cannot
be blank. You can use the onboard keyboard
to enter the desired DVR ID.
User
The User settings allow you to modify or set
user IDs/user names and passwords.
Procedure Using the Remote
Controller or Control Panel:
1. To change password for a particular user, select the User
Name first by pressing [LEFT], [RIGHT], [+] or [-].
2. Using the numeric keys on the remote controller, input your current password.
If you press [SELECT], the On-Screen Keyboard will appear. You can use it to input your current
password. Note that only numbers are allowed.
3. Input your new password.
4. Confirm new password.
5. Press [ENTER] or [SELECT] to save settings. Note: Make sure that the selector is in Username or
Remote View Field to save the new password. Press [SETUP] or [BACK] to exit without saving.
You can navigate by pressing [UP] or [DOWN] anytime.
Your password should be a 4-digit number.
When you key-in an invalid password, you will receive an “Invalid Entry” alert.
37
Default password for all Users
9
Admin is 5678 14 User5 is 5555
10 User1 is 1111 15 User6 is 6666
12 User2 is 2222 16 User7 is 7777
12 User3 is 3333 17 User8 is 8888
13 User4 is 4444 18 User9 is 9999