Rugged Cams Rugged Vision DVR - Manual (Page 57)

Presets
This function enables the user to
access/modify presets. Note that you will
not be allowed to use this function if no PTZ
cameras are connected.
Procedure Using the Remote Controller or Control
Panel:
1. In SETUP, select PTZ->Presets.
2. In Presets Setup, use [UP] or [DOWN] to
navigate through the menu.
3. Use [LEFT], [RIGHT], [+] or [-] to change the values.
4. When you check a preset, press [ENTER] or
[SELECT] to set the position of the PTZ camera. After
pressing [ENTER] or [SELECT], [UP], [DOWN], [LEFT] and
[RIGHT] will move the camera position. Use [+], [-], [MODE]
and [BACK] to zoom in or out.
5. After you have positioned the camera to the
desired view and zoom, press [ENTER] or [SELECT]. You
will be able to navigate the menu again as explained in item
#2.
6. When you are done, press [ENTER] or [SELECT] again to exit and save changes. Or, press
[SETUP] or [BACK] to exit without saving.
Language
Language setup allows you to choose which
language the system will use.
Procedure Using the Remote Controller
or Control Panel:
1. In SETUP, use [UP] or [DOWN] to select LANGUAGE.
2. Press [ENTER], [SELECT] or [RIGHT] to expand the sub-menu.
3. To select a language, press [ENTER], [SELECT], [+] or [-].
4. Press [LEFT] to go back to the main selection. Or, press [LIVE VIEW] to exit SETUP.
English is the language used by default. Other languages available are the following: Traditional Chinese, Simplified
Chinese and Portuguese.
57