Rugged Cams Rugged Vision DVR - Manual (Page 26)

Relay Control
Relay Control is used to manually toggle relays as ON or OFF. A red-colored relay is ON. A transparent
relay is OFF. A relay with a heavy border is the currently selected relay.
Procedure Using Remote Controller:
1. Press [RELAY].
2. Press [LEFT], [RIGHT], [+] or [-] to select username.
3. Press [DOWN] to move to the password field. Use the numeric keys to enter the password then press
[ENTER].
4. Press [1], [2], [3]… to toggle relay 1, 2 (and so on) as ON or OFF. Alternatively, press [LEFT] or
[RIGHT] to select a relay, then press [ENTER] to toggle the status of the relay.
5. Press [RELAY] again or [LIVE] to go back to LIVE VIEW.
Procedure Using Control Panel:
1. In LIVE VIEW, press [MODE].
2. Select Relay by pressing [UP]/[DOWN] then [SELECT].
3. Select username by pressing [LEFT/RIGHT].
4. Press [DOWN] to move to the password field. Use the on-screen keyboard to type the password.
5. Press [LEFT] or [RIGHT] to select a relay, then press [SELECT] to toggle the status of the relay.
6. Press [BACK] to go back to LIVE VIEW.
26