Rugged Cams Rugged Vision DVR - Manual (Page 16)

HDD
How to Install or replace the
HDD:
1. Place HDD1 to the left side of the
bracket and connect it using the screws.
Note: The jumper setting of your HDD1
should be on Slave.
2. Place HDD2 to the right side of the
bracket and connect it using the screws.
Note: The jumper setting of your HDD2
should be on Master.
3. Place the HDD bracket inside the DVR
unit.
4. Attach the left side of the bracket to the
DVR chassis using the screws.
5. Attach the right side of the bracket to the
DVR chassis using the screws.
6. Connect the IDE cable to HDD1 and
HDD2.
7. Connect the power cable to HDD1 and HDD2.
Cameras
How to Connect Cameras to the DVR:
1. Connect cameras to DB25 cable’s Video
Inputs, labeled CAM1 to CAM8.
2. Connect the DB25 cable to the unit’s DB25
Video and Audio Input Connector.
16