Rugged Cams Rugged Vision DVR - Manual (Page 6)

INSTALLATION AND SAFEGUARDS
All the safety and operating instructions should be read before the unit is operated.
Environment Condition for Installation
To prevent electric shock or other hazards, do not expose units to rain, moisture or dust.
This unit should be located in an area with low humidity and minimum dust.
Place this unit in a well-ventilated place and do not place heat-generating objects on this unit.
This unit should not be located in an area where it is likely to be subjected to mechanical shocks.
Before You Start
This unit should be operated only from the type of power source indicated on the manufacturer’s label.
Notes
1. Be aware thoroughly about the power connection before installation of the unit.
2. Repairs should be referred to the supplier or to the manufacturer.
3. There are sensitive parts in the equipment. Do not dismantle the equipment.
4. Power cord should be arranged safely. Do not touch power cord with wet hands.
5. Do not use loose plug or damaged power cable.
6. Do not use benzene, thinner or alcohol for cleaning the product. It could damage the product.
7. Do not touch exposed terminals.
8. To switch off the system, simply unplug power cord from socket, and then switch off the peripheral
equipment.
9. When smoke is seen coming from the equipment, immediately unplug the power cord from power
source to prevent fire or electric shock.
6