Rugged Cams Rugged Vision DVR - Manual (Page 66)

7. Iris Control – Adjusts amount of light entering the camera
6. Focus Control – Adjusts focus
5. Zoom Control – Zooms In/Zooms Out
4. Camera Selector – Selects camera
3. Auto Pan – Executes a pre-programmed sequence of
PTZ commands
2. PTZ Schedule – Indicates that there is/are scheduled
PTZ command(s)
1. Pan/Tilt buttons – Pans/Tilts camera
To use PTZ Function, ensure that your camera is a PTZ
(Pan/Tilt/Zoom) camera.
PTZ Function
8. Pan/Tilt Speed – Adjusts pan/tilt speed
9. Zoom Speed – Adjusts zoom speed
10.Focus Speed – Adjusts focus speed
11.
Pattern Tracking – Opens Pattern Tracking table
12.Preset – Opens Preset table
13.Group Run – Opens Group Run table
Presets
To display the list of presets available, simply click on the Preset button. Presets
are predefined locations where a PTZ camera has been focused.
To set up a preset, refer to the Server Setup > Presets section.
1. Select a preset from the list.
2. Click on the Go button to run the selected preset.
66