Rugged Cams Rugged Vision DVR - Manual (Page 14)

Remote Controller
*For the remote control,
use 1 lithium ion 3V battery
Buttons Description
DVR – External Unit Description
1. Live Switch to Live View Mode
2. Setup Switch to Setup Mode
3. ENTER / Cycle Save settings or Go to / Cycle cameras
4. Up / Down / Left / Right Arrows Move up / Move down / Move left / Move right
5. Record Start/Stop FORCED recording
6. Search Search and playback recorded video
7. Backup Switch to Backup Mode
8. Focus For increasing/decreasing focus *For PTZ
camera only
9. Iris For increasing/decreasing brightness *For PTZ
camera only
10. Zoom For zooming in or out
11. Speed Up To increase playback speed 2x, 4x, 8x or 16x
12. Speed Down To decrease playback speed 1/2x, 1/4x, 1/8x,
1/16x
13. Play / Freeze Play video / Freeze or pause video
14. Next Go to next frame (frame by frame)
15. Previous Go to previous frame (frame by frame)
16. Forward Forward playback of video files 10 seconds;
also used in search to move 5 hours/minutes up
17. Rewind Rewind playback of video files 10 seconds; also
used in search to move 5 hours/minutes down
18. Audio Enter Audio Mode
19. Relay Enter Relay Mode
20. PIP Picture in Picture
21. PTZ Enter PTZ
22. Display Adjust image brightness, contrast, hue and
saturation
23. Number Buttons Go to camera number (1), (2) … and so on
24. Number 10 button Also functions as a “0” button when used as a
single digit in passwords, labels, ip address, etc.
14