Rugged Cams Rugged Vision DVR - Manual (Page 24)

Display Freeze
Procedure Using the Remote Controller:
1. Press [FREEZE] to pause display.
2. To exit, press on [FREEZE] again.
This function is available only on the remote
controller.
Image Enhance
Image enhancement capabilities include ability to control Brightness, Contrast, Saturation and Hue of
each camera. Recording (or recorded videos) will be affected by these settings.
Procedure Using the Remote Controller:
1. Press [DISPLAY] to adjust Brightness, Contrast, Saturation and Hue.
2. Press [UP] or [DOWN] to select image enhancement option.
3. Press [LEFT], [RIGHT], [+] or [-] to increase or decrease values.
4. Press [ENTER] to save settings and go back to Live View. Or, press [DISPLAY] to exit, without saving
changes.
Procedure Using the Control Panel:
1. In LIVE VIEW, press [MODE].
2. Select Display by pressing [UP]/[DOWN] and [SELECT].
3. Press [UP] or [DOWN] to select image enhancement option.
3. Press [LEFT] or [RIGHT] to increase or decrease value for that particular option. 4. Press [SELECT] to
save settings and go back to LIVE VIEW.
5. Press [BACK] to exit without saving changes.
NOTE: Values are displayed on the right, indicated from numbers 1-25. The default value for all images enhance
options is 12.
24