Epson Action Laser II - Manual (Page 92)

SelecType Options
CTS OFF
ON
*OFF
When CTS (Clear To Send) is off, the signal level is permanently set
HIGH. The factory setting is off (signal level is HIGH). This setting
should be set to off for most communications purposes. When CTS is
on, data is sent to the computer only when CTS is HIGH.
RX-BUFFER SIZE
1
to 99 (K)
The receive buffer size option allows you to change the size of the
printer’s input buffer. By choosing an appropriate buffer size, you
can quickly transfer the contents of a file from the computer’s
memory to the printer’s memory. The printer then prints the
information from its own memory and frees up the computer for
other tasks. If you set the buffer size too high, you may get an error
message telling you to add memory. The factory setting is 1K.
4-28 SelecType