Epson Action Laser II - Manual (Page 71)

Using SelecType
Steps to using SelecType
There are five basic steps to using SelecType:
1. Enter SelecType mode.
2. Move to the option you want.
3. Set, select, or execute the option.
4. Save the new setting, if necessary.
5. Exit SelecType mode.
You’ll see how to complete each step on the following pages. This
section uses the SelecType Level 1 INPUT option to explain the steps
to using SelecType. You may want to try each step as you read it for
hands-on practice.
Enter SelecType mode
SelecType has two levels, Level 1 and Level 2. To enter Level 1 press
the SelecType button until SelecType LEVEL1 appears on the display;
to enter Level 2 hold the button down longer until SelecType
LEVEL2 appears.
Press
SelecType until SelecType LEVEL1 appears on the display.
Then one of the Level 1 main menu options appears.
Move to the desired option
After the SelecType Level 1 or Level 2 display appears, you see one
of the main menu options. To look at the other options at this level,
use the and buttons.
Note: If you are using the INDIVIDUAL setting, you choose a
channel before this step.
SelecType
4 - 7