Epson Action Laser II - Manual (Page 20)

Introduction
On rare occasions, a print job needs an extra push.
For some print jobs (such as a print screen), the printer may not
print even though the data has been sent to the printer’s
memory. If the
FEED
light is on, press
ON LINE
to take the printer
off line and then press the
FEED
button to print.
Adjust your software’s lines-per-page setting to 60.
You may have used a lines-per-page setting of 66 with your dot
matrix printer. For most application software, you will need to
reduce the lines-per-page to 60 when printing with your laser
printer.
You may have to add memory if you print highly complex
graphics.
Your printer’s 0.5MB memory easily handles most print jobs.
However, if the INSUFF MEMORY, ADD MEMORY, or PAGE
BUFFER FULL appears, you may have to add memory using the
optional memory board and memory chips. See Appendix A in
this manual.
Take advantage of your printer's special features.
Your printer allows you to produce typeset-quality images. Use
this manual along with your computer software manuals to
enhance your printed presentations. The more legible and
pleasing your document, the more likely it will be read and well-
received.
Rest assured that your laser printer is safe to use.
Don’t hesitate to open the printer to clear paper jams or to
replace the toner cartridge or photoconductor unit. Simply
follow the Laser printer precautions found earlier in this chapter.
Introduction 9