Epson Action Laser II - Manual (Page 230)

Optional Epson GL Identity Card
Inserting a card
You can insert a card into the slot on
the
right side of the printer.
CAUTION:
Never insert or remove a card while the printer is
on
line, in SelecType mode, or while the printer is
resetting (after you press
RESET).
Be careful
when
you insert or remove a card. You
can
damage
the
card by trying to insert it the wrong way
or by using too much force.
1. Make sure that the printer is not in one of the following
conditions:
The
FEED
light is flashing fast. (The printer is receiving data
through the currently-selected interface.)
You are setting parameters using SelecType.
The display shows the RESET message.
2. If
the
FEED
light is on, make sure the printer is off line and press
FEED to
print any data remaining in the buffer.
3.
Set the
printer off line (make sure the
ON LINE
light is off) or turn
off the power.
4. Hold the card so that the large
EPSON
logo faces up and the
arrow is pointing toward the slot.
A-22 Options