Epson Action Laser II - Manual (Page 238)

Using the Font Cartridges
Inserting a font cartridge
You insert a font cartridge into the slot on the front of the printer.
CAUTION:
Never insert or remove a cartridge while the printer is
on line, in SelecType mode, or while the printer is
resetting (after you press
RESET).
Be careful when you insert or remove a font cartridge.
You can damage the cartridge by trying to insert it the
wrong way or by using too much force.
1. Make sure that the printer is not in one of the following
conditions:
The FEED
light is flashing fast (the printer is receiving data
through the currently selected interface).
You are setting parameters using SelecType.
The display shows the RESET message.
2.
If the
FEED
light is on, press
ON LINE
to take the printer off line;
then press
FEED
to print any data remaining in the buffer.
3. Make sure the printer is off line (the
ON LINE
light is off) or turn
off the printer.
B-4 Font Cartridges