Epson Action Laser II User Manual

Page 56

Connecting the Printer to Your Computer

4. If your cable has a grounding wire, connect it to the printer’s

ground connector as shown.

5. Plug the other end of the parallel cable into your computer and

fasten the connector screws to the interface, if necessary. Some

parallel cables have grounding wires at the computer end as

well. If so, connect this wire to the ground screw on the

computer.

Note:

You can use the SelecType Level 2 I/F CONFIG option to

change some of the parallel interface settings. However, you will

probably never need to change these settings.

Now you can test the computer-to-printer connection as described

below.

2-16

Testing and Connecting Your Printer